The SLS-A has a 23 mm diameter stainless steel oil filled silicon piezoresistive sensing capsule . The submersible level sensor can provide an unamplified ratiometric millivolt output or an amplified analogue output signal corresponding to ranges from 0…0.5 mWG (20 inWG) up to 100 mWG (328 ftWG).
SLS-A Submersible Level Sensor Overview
- Ranges: 0.5 mWG (20 inWG) up to 100 mWG (328 ftWG)
- Output Signals: mV/V, 2mV/V, 10mV/v, 4-20mA, 0-5V, 1-5V, 0-10V, ratiometric 0.5 – 4.5V dc
- Accuracy: 0.25%, 0.15% FS, 0.1% FS
- Electrical Connections: IP68 submersible cable seal
- Process Connections: Nose cone or G1/4 DIN3852 male
- Media Compatibility: Housing – SS316, Diaphragm – SS316, Internal Seals – Viton/EPDM/NBR, Cable – PUR
- Diameter: 23mm
SLS-A Level Sensor Description
The SLS series of submersible level transmitters have been developed using an isolated diaphragm silicon piezo-resistive sensing element housed in a robust stainless steel housing. It has an integrated moulded cable assembly to provide permanent submersible in liquids up to 100m depth for continuous operation.
The device is available in either a raw millivolt output which is great for low power applications or an internal microprocessor is fitted to provide an amplified output such as 4-20mA, 0-10V, 0.5 to 4.5V ratiometric.
The onboard 16-bit microprocessor enables a high level of linearization, temperature compensation and calibration to be performed ensuring the highest accuracy, stability and repeatability are met for demanding applications such as environmental monitoring and flood defence systems, river, reservoir or borehole measurement
SLS-A Level Sensor Enquiry Form
Enter what you can below and we will get back to you within the next couple of hours